F1 Basic
The F1 basic is for flexo printing only, a universal flexo tester for use with solvent based inks, UV inks and water inks on a range of substrates.
Description
The F1 basic is for flexo printing only, a universal flexo tester for use with solvent based inks, UV inks and water inks on a range of substrates.
The IGT F1 Basic is equipped with a number of preset / pre-selected standard printing conditions that will cover the most common test applications. This makes the F1 Basic a very user-friendly, reliable and consistent printability tester for flexo. The IGT F1 Basic ensures consistent results due to simple operation, low maintenance and high accuracy.
- High reproducibility
- Simple to operate
- Consistent results
Features
Inking and printing sections
- Electronic control of printing force and speed
- Printing speed: 0,3; 0,6; 0,9 m/s
- Anilox/printing force: 100/150; 200/300; 300/450 N
- Maximum substrate thickness: 4 mm
- Printing width on substrate: 40 mm
- Print length ca. 500 mm
- Anilox- or engraved disc is inked automatically up to 20 times
- Photopolymer printing form can be inked up to 20 times
- Flexo mode only
Doctor blade
- Doctor blade angle: 60°, dragging
- Doctor blade pressure: 6 – 7 N
Discs
- Flexo aniloxes
- copper engraved, chromium plated, solid and 4 engravings
- Ceramic, laser engraved, solid
- Range of volumes
General
- Modern styling
- Simple operation; touch screen
- Reliable
- Low initial cost
- Possible to use many substrates and inks
Weight: 35 kg
Dimensions (HxWxD): 35 cm x 60 cm x 35 cm
Electrical connection: 100 – 240 V /2.5 AT / 250 VA / 50 – 60 Hz
Technical details
| Weight: | 35 kg |
| Dimensions(L x W x H): | 30 cm x 60 cm x 35 cm |
| Model: | 421.000.100 |
| Main application: | — |
| Conformance with standards/W-leaflet: | ISO 2834-2 / ISO 2836 / ISO 2846-3 / ISO 2846-5 |
| Water bath and temperature: | — |
| Speed range and modes: | 0.3 – 0.6 – 0.9 m/s |
| Forces: | Anilox/printing force: 100/150; 200/300; 300/450 N |
| Substrate requirements: | Flexible and rigid substrates, maximum thickness: 4 mm |
| Interval time and number: | — |
| Printing shafts type and options: | 1 shaft |
| Shaft positioning: | Automatically |
| Lifting system: | Automatically |
| Print length and width: | ca. 500 x 40 mm² |
| Printing discs: | Chromium plated in copper engraved Ceramic laser engraved anilox discs Various line rulings and volumes |
| Sector positioning: | Automatically |
| Sector type and options: | Exchangeable 156 – 171 mm diameter |
| Doctoring system: | Doctor blade angle 60°, dragging |
| Dispensing system: | Pasteur pipette |
| Pre-programmed tests: | — |
| Analysis options: | Off-line with Print Target |
| Interfaces: | — |
| Software updates: | — |
| Data export options: | — |
| Additional items: | 496.000.075 UV Dryer Aktiprint mini 12-1, 1 lamps, 500 W 496.000.275 UV Dryer Aktiprint mini 12-2, 2 lamps, 1000 W 495 Lightbooth with 4 lightsources (A, UV, D65, F10) 555.000.060 IGT Glossmeter G60 (60°) |
| Accessories: | — |
| Inks or liquids: | — |
| Inking speeds: | — |
| Inking programs: | N.A. |
| Top rollers: | — |
| Maintenance: | Yearly. The maintenance and calibration of the tester can be carried out by IGT Testing Systems or companies authorized by IGT Testing Systems. Information can be obtained from your supplier or the local agent. |
| Compatible instruments: | 432.000.100 F1 432.000.600 F1 Corrugated 439.000.100 F1UV 439.000.200 F1-LED-UV 395 nm 439.000.300 F1-LED-UV 365 nm |
| Measurement range: | — |
| Light source/ power/angle: | — |
| Volume: | — |
| Shelf life: | — |
| Use life: | — |
| Description of property: | — |
| Power Supply Requirements: | 100 – 240 V /2.5 AT / 250 VA / 50 – 60 Hz |
| Guarantee: | Standard one year |
| Space requirements: | 0.7 m² |
| Standard delivery time: | 6-8 weeks |